Image Map

Tuesday, October 8

A Faux Wood Painting Tutorial

Pin It!
I just finished painting my metal door to make it look like wood. This is a great way to add character & warmth where it didn't exist before! Here's the video of a Studio 5 segment demonstrating this technique - followed by a text/photo tutorial . . . 





And here are the steps . . .

Clean the object you are painting & if the surface is shiny, it might need a primer.

Step 1: Cover with a layer of paint. I used Behr exterior flat paint in "Apricot Light". Allow to dry.
Step 2: Add a coat of a light gel stain. I used Old Masters "Maple 81208". Allow to dry.
Step 3: With a little of the darker stain color {I used Minwax Chestnut 601} on a sponge brush, twirl it in a circle to make a "knot". It can be dabbed with a rag if too much is applied. Allow to dry.
Step 4: Apply a layer of the darker stain. {In this case, Minwax Chestnut 601 again. Allow to dry.
Next: Apply a layer of polyurethane. I like Varathane Spar Urethane Outdoor Clear SATIN finish.
This technique works really well & I think it is really easy to pull off. {But of course I cannot promise you will get the same results I did.} I do recommend that you practice before painting anything of importance. 

You can get most of the supplies I used on-line if it's more convenient for you. (If you order from the links provided, Honey I'm Home receives a small commission - this helps me keep my blog running. Thank you!)


22 comments:

  1. Michelle, this is wonderful! What a fun technique...thanks for sharing!

    ReplyDelete
    Replies
    1. Thank you, darling Nat, for stopping by. It's great to hear from you!

      Warmly, Michelle

      Delete
    2. Hi Michelle, This is such a great idea. Do you think it would work as well on a smooth finish raised panel exterior door? I noticed that yours has a faux wood grain already. Thanks!

      Delete
  2. This is stunning Michelle! Off to pin!

    ReplyDelete
    Replies
    1. Thanks so much Stacy! You're the best.

      Warmly, Michelle
      PS - Sorry I left two comments on your linky party today. Oops! Please feel free to erase the one that was a mistake. (I couldn't figure out how to do it. Ha ha.)

      Delete
  3. Hey, that's impressive! Good job Michelle!!!

    ReplyDelete
    Replies
    1. Glad you like it. Thanks so much for stopping by Friend!

      Warmly, Michelle

      Delete
  4. Found you over at my sister's blog (Beth's). I'm very impressed with the door! It looks so real! I'll be sharing this later on my FB page! Great job!
    ~Kim @ Sand & Sisal

    ReplyDelete
    Replies
    1. Thank you so much for the comment AND the FB shout out Kim!

      Warmly, Michelle

      Delete
  5. You have me floored! This is absolutely stunning and I never would have thought to do a faux wood treatment for the door. Thank you for this amazing tutorial and I will be attempting it soon!

    ReplyDelete
    Replies
    1. Thank you so much Andrea for your sweet comment & for taking the time to leave it. Please let me know if you do a project like this - I'd love to see your pics!

      Warmly, Michelle

      Delete
  6. this is amazing!!! Would love to do this on our garage door. Thanks for the tutorial.
    XO
    Kristin

    ReplyDelete
    Replies
    1. Thank you so much Kristin. It looks great on garage doors.

      Warmly, Michelle
      PS - I love your blog!

      Delete
  7. You did such a wonderful job on your door. It's so unique! What a great tutorial!

    Brandi @ Nest of Bliss

    ReplyDelete
    Replies
    1. Thank you cute Brandi. I really appreciate you for stopping by & leaving a comment.

      Warmly, Michelle

      Delete
  8. I love this! I can't wait to give this a try on my garage door.

    ReplyDelete
    Replies
    1. Thank you so much for stopping by & leaving a comment. If you do your garage, I'd love to see pics!

      Warmly, Michelle

      Delete
  9. I just did this on my steel basement door, and it's gorgeous! Thanks for the top!

    ReplyDelete
    Replies
    1. How wonderful! I'm so glad it turned out nice. Please send pictures!

      Warmly, Michelle

      Delete
  10. This comment has been removed by the author.

    ReplyDelete
  11. Could I do some thing like this on ceiling fan blades? They are white now.

    ReplyDelete
    Replies
    1. Hello, yes - I absolutely think this treatment would work for that! If the finish is shiny, I would lightly sand & prime the blades first to make sure the paint sticks. Thank you so much for stopping by!

      Delete

I love getting comments, but I am WORN OUT from a barrage of spam. I had to turn off my comments for now. If you would like to send me a message you can email me at mishlunt@yahoo.com.

Thank you for reading Honey I'm Home!

Note: Only a member of this blog may post a comment.